Select Page

Site Drainer Pit Boss 102 R 1Hp Submersible Dewatering Pump / Sump Pump with Non Clogging Stainless Steel Screen and Knotted Pull Rope

$829.00

Out of Stock (Available to Backorder)

x
Add to Wishlist
Add to Wishlist
SKU: 17000112 Categories: , Brand: UPC: 853257007144

Description

The Pit Boss 102 R 1Hp (750w) Submersible Pump Comes with the pre-attached Knotted Fireman’s Rope. The 102 R is for jobs that need to be done once and then move on to the next job. The fireman’s rope prevents accidental pulling on the electric cord. Just drop the Pit Boss 102 R into the water and no matter how debris filled the water gets, the job gets done. Highly transportable but designed for tough environments. The Pit Boss 102 R can suck water out of the most debris filled environment. 83 Gallons Per Minute with 5’ lift and maximum Head of 49’. It comes with 33’ power cord, runs off 110-Volts, draws only 10.7 Amps, and has 2” NPT male discharge flange to accommodate lay flat hoses. The Pit Boss is perfect for construction sites, manholes, municipal maintenance, sump pits, emergency flood water drainage, flooded basements, debris filled pools, and any commercial or general de-watering jobs. This pump will get the job done.

  • Highly transportable yet rugged enough for the toughest jobs
  • Patented stainless-steel cage with ¼” openings that surrounds the pump preventing rocks, rope, and other debris from clogging the pump impeller, rendering trouble-free, long lasting operation
  • Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and dry-run capability
  • Pumps up to 4980 gallons per hour at 5 ft. lift, emptying sump pit in seconds
  • Knotted Fireman’s Rope allows for easy deployment and retrieval without damaging the power cord.
  • Pump motor is housed in watertight casing, conforms to class F insulation; 110-Volts motor, draws 10.7 Amps. Motor has a built-in thermal protector which protects against overheating and extended dry run.
  • Perfect for commercial and industrial site dewatering, construction sites, civil engineering projects, municipal maintenance, basements, residential, removing residue water.
  • 33 ft. power cord, 2” male discharge flange, easy-to-grip handle makes this pump easily portable

Download Site Drainer Pit Boss 102 R Manual

Specifications

 

Motor Output HP/Watts: 1.0 HP / 750 Watts, 60Hz
Voltage: 110
Phase: Single
Power Cord Length: 33′ (FT)
Discharge Connection: 2″ NPT
Max Solids Diameter: 1/4 inch / 6.35mm
Max Temp: 104°F / 40°C
Impeller Material: Polyurethane
Float: No Float
On / Off: Manual
Motor Protection: Thermal Overload Built In
Internal Lubricant: Turbine Oil VG32 (150 CC)
Running Amps: 10.7
Weight: 33 Lbs.
Dimensions: 8.5″ Diam x 13.5″ H

 

Discharge Flow Chart

 

 Head GPM GPH
49′ 0 0
45′ 19.9 1193
40′ 35.3 2115
35′ 47.5 2848
30′ 56.6 3395
25′ 63.3 3798
20′ 70.0 4201
15′ 74.1 4443
10′ 78.5 4711
5′ 83.0 4980

Additional information

Weight 33 lbs

Reviews

There are no reviews yet.

Be the first to review “Site Drainer Pit Boss 102 R 1Hp Submersible Dewatering Pump / Sump Pump with Non Clogging Stainless Steel Screen and Knotted Pull Rope”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.