Powers 6984 Powerbolt Sleeve Anchor 1/2″ x 5″ Flat Head, Carbon Steel (50/box)

Description

Box of 50 • Column Base Plates and Mechanical Equipment • Dock Bumpers and Support Ledgers • Racking and Railing Attachments The Power-Bolt anchor is a heavy duty sleeve style, self-locking anchor which is vibration resistant and removable. It is available with a finished hex head or flat head with a hex key insert and can be used in concrete, block, brick, or stone. Expansion occurs at two locations within the drilled hole. First, the cone is pulled into the large triple-tined expansion sleeve, developing a mid-level, compression force. Further turning causes the threaded bolt to advance into the threads of the expander cone, forcing its four sections outward. This action engages the base material deep in the anchor hole, greatly increasing the holding power of the Power-Bolt. The bolt and cone remain locked together which prevents loosening under vibratory conditions. The Power-Bolt is also designed to draw the fixture into full bearing against the base material through the action of its flexible compression ring. As the anchor is being tightened, the compression ring will crush if necessary to tightly secure the fixture against the face of the base material. The internal bolt of the Power-Bolt is removable and reusable in the same anchor sleeve making it suitable for applications such as mounting machinery which may need to be removed for service and for temporary applications such as heavy duty form work. APPROVALS AND LISTINGS CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090-Metal Fastenings. Expansion anchors shall be Power-Bolt as supplied by Powers Fasteners, Inc., Brewster, NY.

Features:

• High load capacity
• Two-level expansion mechanism
• Internal high strength bolt is removable and reusable
• Compression zone in sleeve clamps fixture to the base material
• Low profile finished head design
• HEAD STYLES
• Finished Hex Head
• Flat Head
• ANCHOR MATERIALS
• Zinc Plated Carbon Steel
• Type 304 Stainless Steel
• ANCHOR SIZE RANGE (TYP.)
• 1/4″ diameter through 3/4″ diameter
• SUITABLE BASE MATERIALS
• Normal-Weight Concrete
• Structural Lightweight Concrete
• Grouted Concrete Masonry (CMU)
• Hollow CMU
• Brick Masonry
• Stone