Select Page

DeWALT AC100+ Gold® Vinylester Injection Adhesive Anchoring System

(1 customer review)

$27.79$48.79

The AC100 Gold is a two-component vinylester adhesive anchoring system.

x
Add to Wishlist
Add to Wishlist

Description

The AC100 Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools, and hole cleaning equipment. The AC100 Gold is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials.

Features

  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
  • Evaluated and recognized for freeze/thaw performance
  • Evaluated and recognized for a range of embedments in interior and exterior applications
  • Versatile low odor formula with quick cure time
  • Evaluated and recognized for long term and short term loading (see performance tables)
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Cartridge design allows for multiple uses using extra mixing nozzles

General Application & Uses

  • Bonding threaded rod and reinforcing bar into hardened concrete and masonry
  • Evaluated for use in dry and water-saturated concrete including water filled holes
  • Suitable to resist loads in cracked or uncracked concrete base materials for cases where anchor design theory and criteria applies
  • Can be installed in a wide range of base material temperatures; qualified for installations structural applications in concrete as low as 14ºF
  • Qualified for seismic and wind loading (see ESR-2582)

Approvals & Listings

  • International Code Council, Evaluation Service (ICC-ES) ESR-2582 (Including FBC Supplement)
  • Code compliant with the 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC, and 2006 IRC
  • Tested in accordance with ASTM E 488 and ICC-ES AC308 for use in structural concrete with ACI 318 Appendix D (Strength Design).
  • Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects; minimum requirements for materials in contact with potable water and water treatment
  • Conforms to requirements of ASTM C 881, Types I, II, IV and V, Grade 3, Classes A & B (meets Type III with exception of elongation)
  • Department of Transportation listings – see www.powers.com or contact transportation agency

Resources

Additional information

Weight N/A
Size

10 Fl. Oz. Quick-Shot, 12 Fl. Oz. Dual Cartridge, 28 Fl. Oz. Dual Cartridge

1 review for DeWALT AC100+ Gold® Vinylester Injection Adhesive Anchoring System

  1. Kenneth Hansell (verified owner)

    Works awesome. Be aware this sets up fast! Make sure you are completely prepared and have done all of your hole prep prior to using this adhesive. Remove any excess immediately or you will be forced to chisel it off. If you have a slight delay in finishing the use of a tube be sure to take compressed air and blow out the mixer tube (and extension if applicable) or you will render them useless.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.